Setup - SteelSeries NIMBUS+ Guía De Información Del Producto

SETUP

INITIALIZATION
01 Turn on your Nimbus+ by pressing and
holding the Menu Button
02 All four LEDs
to indicate your Nimbus+ is in pairing
mode. If not, hold the Wireless Pairing
Button for 3 seconds.
09
03 To pair your Nimbus+ to your iOS device,
go to Settings → Bluetooth. "Nimbus+"
will be displayed on the screen. Tap to
Connect.
5
More detailed product information at
.
04
will fade on and off slowly
03
steelseries.com/nimbus-plus
PAIRING TO A NEW DEVICE
01 Press the Wireless Pairing Button
3 seconds.
02 All four LEDs will fade on and off slowly
03
to indicate that your Nimbus+ is in pairing
mode.
RECONNECTING TO
AN EXISTING DEVICE
01 Turn on your Nimbus+ by pressing and
holding the Menu Button
02 During the connecting sequence, the LEDs
will fade on and off, cycling from 1 to 4.
03
The Nimbus+ will automatically reconnect to
the most recent device when powered on.
If you want to connect to a previously paired
device, simply select the Nimbus+ from the
Bluetooth menu on the Apple device.
for
09
.
04