hillvert HT-COMP-1000 Manual De Instrucciones página 3

A. Seitenwand
B. Klappe
C. Befestigungsanker
D. Modul zur Vergrößerung
E. Riegel
HT-M-COMP-360
A
C
D
B
A. Seitenwand
B. Klappe
C. Befestigungsanker
D. Riegel
3.2. VORBEREITUNG ZUR VERWENDUNG
AUFBAU DES GERÄTES
ACHTUNG: Die Explosionszeichnungen von diesem
Produkt befinden sich auf den letzten Seiten der
Bedienungsanleitung S. 17-19.
4
DE
09.04.2021
U S E R M A N U A L
TECHNICAL DATA
Parameter
Parameter value
description
Product
COMPOSTER
name
HT- HT- HT- HT-
Model COMP- COMP- COMP- COMP-
1000 740 480 360
Capacity [L] 1000 740 480 360
Dimensions 933x933 933x933 933x933 689x689
[mm] x1460 x1130 x800 x839
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
LEGEND
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
The terms „device" or „product" are used in the warnings
and instructions to refer to COMPOSTER.
COMPOSTER LOCATION
In order to ensure optimal conditions for the composting
process, properly assembled composter should be placed
in a shady place with good air circulation. lt is important,
that composter should be placed directly on the soil (if
necessary we recommend using only a garden grid as
a base).The proper position of the composter allows for
drainage of excess moisture and earthworms and microbes
access to the compost.
SUITABLE MATERIAL FOR YOUR COMPOSTER
Organic waste from your garden and/or kitchen (e.g.: green
parts of plants, garden cuttings, scobs, leaves, needles,
cork, rotten fruit and flowers, weeds without seeds, organic
kitchen waste, cold ash). Cut grass should be mixed with
other waste. Otherwise the excess of cut grass can provoke
rotting of the composter content.
09.04.2021
EN
HOW TO PROPERLY PREPARE COMPOST?
We recommend that the bottom layer of the composter
should be covered with small cut branches, which allow
drainage of the excess moisture from the upper layers
of compost. Material for composter should be diverse,
dispersed and well mixed. Do not tamp the content of
the composter, because it slows down the composting
process. Every few weeks, we recommend you to mix
the upper layers of the material in the composter. An
important aspect of the composting process is to maintain
an adequate level of moisture. Depending on the situation,
compost should be watered, or in the case of long period
of heavy rain composter should be covered.
READY-MADE COMPOST
Depending on the composting conditions (temperature,
humidity, composition), the compost should be ready
within eight weeks up to one year. Ready-made compost
should have a compact and absorbable texture, resembling
soil/peat.
HOW TO USE READY-MADE COMPOST
Compost is a natural fertilizer that can be used in many
places in your garden to improve plant growth. The thin
compost layer may be spread over the lawn. Ready-made
humus may also be used around trees and shrubs.
3. USE GUIDELINES
The product is used for composting biodegradable waste.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
HT-M-COMP-1000/ HT-M-COMP-740/ HT-M-COMP-480
A
C
B
E
D
5