Black and Decker BDST182ST1 Manual De Instrucciones página 8

Ocultar thumbs Ver también para BDST182ST1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 60
ENGLISH
switched off and when it is running idle in
addition to the trigger time.
Additional safety instructions for
grass trimmers
Warning! Cutting elements continue to
rotate after the motor is switched off.
Be familiar with the controls and the
u
proper use of the appliance.
Always remove the battery from the
u
appliance whenever the appliance
is unattended, before clearing a
blockage, before cleaning and
maintenance, after striking a foreign
object or whenever the appliance
starts vibrating abnormally.
Wear stout shoes or boots to protect
u
your feet.
Wear long trousers to protect your
u
legs.
Before using the appliance, check that
u
your cutting path is free from sticks,
stones, wire and any other obstacles.
Only use the appliance in the upright
u
position, with the cutting line near the
ground. Never switch the appliance on
in any other position.
Move slowly when using the appliance.
u
Be aware that freshly cut grass is
damp and slippery.
Do not work on steep slopes. Work
u
across the face of slopes, not up and
down.
Never cross gravel paths or roads
u
while the appliance is running.
Never touch the cutting line while the
u
appliance is running.
Do not put the appliance down until the
u
cutting line has come to a complete
standstill.
8
(Original instructions)
Use only the appropriate type of
u
cutting line. Never use metal cutting
line or fishing line.
Be careful not to touch the line
u
trimming blade.
Keep hands and feet away from the
u
cutting line at all times, especially
when switching on the motor.
Before using the appliance and after
u
any impact, check for signs of wear or
damage and repair as necessary.
Never operate the appliance with
u
damaged guards or without guards in
place.
Take care against injury from any
u
device fitted for trimming the filament
line length. After extending new cutter
line always return the machine to
its normal operating position before
switching on.
Always ensure that the ventilation slots
u
are kept clear of debris.
Additional safety instructions for
batteries and chargers
Batteries
Never attempt to open for any reason.
u
Do not expose the battery to water.
u
Do not store in locations where the
u
temperature may exceed 40 °C.
Charge only at ambient temperatures
u
between 10 °C and 40 °C.
Charge only using the charger
u
provided with the tool.
When disposing of batteries, follow
u
the instructions given in the section
"Protecting the environment".

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bdst182l1

Tabla de contenido