Checking/Sharpening/Replacing The Blade; Adjusting The Carburettor - Deltafox DG-PLM 4622 SP Traducción Del Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 150
• Change the engine oil for the
first time after around 5 operat-
ing hours then every 50 operat-
ing hours or annually.
• Dispose of the used oil in an
ecofriendly manner (see "Dis-
posal/Environmental protection").
1. Remove the spark plug connector
13) (see "Maintaining the Spark
(
Plug").
2. Open the oil tank cover (
pump out the motor oil with an oil
pump.
3. Refill with engine oil (see "Initial Op-
eration").
Checking/Sharpening/Replac-
ing the Blade
Only allow specialist companies to
install and dismantle the knife.
Wear gloves when handling the
blade.
Take off the spark plug connector
13) and check the blade for wear
(
and damage.
Always have a blunt blade resharp-
ened by a specialist company, as an
imbalance check can be carried out
there.
Always have a specialist workshop
change a damaged or imbalanced
blade.
Incorrect installation can result
in serious injury.

Adjusting the Carburettor

The carburettor has been preset in the
factory for optimum performance. If read-
justments are required, have the adjust-
ments made by a specialist workshop.
20) and
GB
91

Publicidad

Tabla de contenido
loading

Tabla de contenido