Yamato 95815 Manual De Instrucciones página 8

1,2/15-1,2/20-1,4/30N-1,2/50N/BISTADIO
properly repaired or replaced by an authorized service center unless otherwise indicated
elsewhere by dealer.
• Outdoor use extension cord. When tool is used outdoors, use only extension cords for that use
and so marked.
• For operational safety, do not remove any protection or bolts from their original position.
• Do not touch the moving parts of the machine or its accessories without previously unplugging
the machine electrical cable from the network.
• Protection from electrocution: While using the machine, avoid coming into contact with earthed
objects such as pipes, radiators, ovens and other corded appliances and use shoes with
insulating and dry soles.
• Never clean with solvents.
• On no account vacuum: burning matches, glowing ashes and cigarette ends, inflammable,
corrosive, fire hazard or explosive substances, vapors and liquids.
• This unit is not suitable for vacuum dust which is damaging to health.
• Use the machine only for the tasks for which it has been built and designed.
• Warning : Use not authorized spare parts of other machines can cause incidents.
3
4
5
DESCRIPTION
1- Motor head
2- Plastic tank (code 95815) Stainless steel tank (code 95821-95827-95893)
3- Standard start switch (I/O) -(code 95815-95821) Synchronised start switch (I/O/II) (code 95827-
95893)
4- Connector for electrical tool (IP44-Blu) (code 95827-95893)
5- Castors
ASSEMBLY
1-Remove the machine from the packaging using the special handle
2- Loosen the two locking clips, right and left
3- Remove the suction unit
4- Remove all the accessories stored in the drum
5- Turn the drum upside down and insert the pressure castors
6- Reposition the suction unit and lock the two clips
7- Insert the ferrule of the flexible tube into the front mouth and rotate in a clockwise direction
8- Prepare the appliance with the accessories suitable for the job you intend to do.
Filter Installation and Maintenance
All these models of hydroaspirator can suck both solids and liquids.
For this reason we recommend you use either the sponge or the cartridge filters in order to avoid
filling the motor body with solid debris or foreign bodies that might affect the machine operation.
1
2
8