Worx WX822 Manual De Instrucciones página 8

q) Retain the original product literature for
future reference.
r) Remove the battery from the equipment
when not in use.
s) Dispose of properly.
t) Do not mix cells of different manufacture,
capacity, size or type within a device.
u) Do not remove battery pack from its
original packaging until required for use.
v) Observe the plus (+) and minus (–) marks
on the battery and ensure correct use.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
8
Wear dust mask
Make sure the battery is removed
prior to changing accessories
Wear protective gloves
Do not burn
Batteries may enter water cycle if
disposed improperly, which can be
hazardous for ecosystem. Do not
dispose of waste batteries as unsorted
municipal waste
20V Cordless Detail Sander
Li-Ion battery This product has been
marked with a symbol relating to
'separate collection' for all battery
packs and battery pack. It will
Li-I on
then be recycled or dismantled in
order to reduce the impact on the
environment. Battery packs can be
hazardous for the environment and
for human health since they contain
hazardous substances
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice
COMPONENT LIST
1. ON/OFF SWITCH
2. HANDLE
3.
BATTERY PACK RELEASE BUTTON*
4. BATTERY PACK*
5.
DUST BAG
6. DETAIL PLATE
7.
FINGER PLATE
8.
140X90MM DETAIL H&L SANDING
PAPER*
9.
76X30MM FINGER H&L SANDING
PAPER*
*Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type Designation WX822 WX822.9 (82 -
designation of machinery, representative of
Sander)
WX822
Voltage
No-load speed
Plate size
Orbital diameter
WX822.9
20 V Max**
12000 /min
140x90mm
2mm
EN