Troubleshooting - BS Charger BS 30 Manual Del Usuario

LED STATUS INIDICATOR TABLE
NORMAL INDICATION
AC Power presented
In soft start phase
In charging phase
In Float mode or Maintenance
ABNORMAL INDICATION
Output reverse polarity or shorted
Charging timer timed out
Battery slight sulphated
Battery heavily sulphated or cells shorted
TROUBLE SHOOTING
Types of Problems Indication
Charger does not No Indicator
work? lights on.
Charger has no DC
Fault LED is On.
output?
Long charging time,
Full light does not Fault LED is ON.
come on?
Long charging time,
Fault LED is
Full light does not
Flash.
come on?
MAINTENANCE
The battery charger is maintenance free. If the power cord is damaged, the charger must be left to the reseller for maintenance. The
case should be cleaned occasionally. The battery charger should be disconnected from the power while cleaning.
| www.bs-battery.com
WHITE LED ON
BLUE
BLUE
GREEN
RED
RED
GREEN
RED
Possible Causes
- No AC power.
- Output is short circuited -
Reverse polarity connection to
Battery.
- Battery capacity too large -
Battery is defective.
- Battery cells internal shorted,
battery heavily sulphated.
Charging light FLASH
Charging light ON
LED ON
Fault LED ON
Fault LED ON
Fault LED FLASH
Fault LED FLASH
Suggested Solution
- Check AC connections and make sure Power
Point is switched ON.
- Check DC connection between charger and bat-
tery and make sure they are not short circuiting.
- Check that the crocodile clips haven't fallen off
the battery.
- Check that the crocodile clips / ring terminals
are connected to the correct polarity.
- Check the charger specification matches the
battery capacity.
- Battery cannot be charged and must be re-
placed.
6