To disconnect the Bluetooth function, you can :
-
Switch to another function on the unit.
-
Disable the function from your Bluetooth device.
The Bluetooth device will be disconnected from
the soundbar after audio prompt.
-
Press and hold the
EN
remote control.
Tips:
•
Enter "0000" for the password if necessary.
•
If no other Bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
•
The player will also be disconnected when your
device is moved beyond the operational range.
•
If you want to reconnect your device to this
player, place it within the operational range.
•
If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the player.
1 Insert the USB device.
2 Press the
press the USB button on the remote control to
select USB mode.
3 During playback:
-
To pause or resume play, press the
button on the remote control.
-
To skip to the previous/next file, press the
/
buttons on the remote control.
Tips:
•
The unit can support USB devices with up to
32 GB of memory.
/ PAIR button on the
button repeatedly on the unit or
•
If the connection is lost, follow the instructions
above to pair your device to the player again.
Listen to Music from Bluetooth Device
-
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the
device through the player.
-
If the device also supports Audio Video Remote
Control Profile (AVRCP), you can use the
player's remote control to play music stored on
the device.
1 Pair your device with the player.
2 Play music via your device (if it supports A2DP).
3 Use supplied remote control to control play
(if it supports AVRCP).
-
To pause/resume play, press the
button on the remote control.
-
To skip to a track, press the
the remote control.
USB Operation
/PAIR
•
This unit can play MP3.
•
The unit support FAT32.
12
/ PAIR
/
buttons on