To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
•
Ensure that the AC cord of the apparatus is
properly connected .
•
Ensure that there is power at the AC outlet.
•
Press standby button to turn the unit on.
Remote control does not work
•
Before you press any playback control button,
first select the correct source.
•
Reduce the distance between the remote
control and the unit.
•
Insert the battery with its polarities (+/-)
aligned as indicated.
•
Replace the battery.
•
Aim the remote control directly at the sensor
on the front of the unit.
No sound
•
Increase the volume. Press Volume Up on the
remote control or on the soundbar.
•
Press MUTE on the remote control to ensure
the soundbar is not muted.
•
Press source buttons to select a different input
source.
•
When using either of the Digital inputs, if there
is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other source,
some TVs do not pass through digital audio.
•
Your TV may be set to variable audio output.
Confirm that the audio output setting is set to
FIXED or STANDARD, not VARIABLE. Consult
your T V's user manual for more detailed
information.
•
If using Bluetooth, ensure that the volume on
your source device is turned up and that the
device is not muted.
Troubleshooting
I can't find the Bluetooth name of
this unit on my Bluetooth device for
Bluetooth pairing
•
Ensure the Bluetooth function is activated on
your Bluetooth device.
•
Ensure you have paired the unit with your
Bluetooth device.
This is a 15 mins power off function,
one of the ERPII standard requirement
for saving power
•
W h e n t h e u n i t ' s e x t e r n a l i n p u t s i g n a l
level is too low, the unit will be turned off
automatically in 15 minutes. Please increase
the volume level of your external device.
13
EN