Placement And Mounting; Wall Mounting (If Using Option-B) - Hisense HS205 Manual De Usuario

Placement and Mounting

Placement
A If your TV is placed on a table, you can place the
unit on the table directly in front of the TV stand,
centered with the TV screen.
B If your TV is attached to a wall, you can mount
EN
the unit on the wall directly below the TV screen.

Wall Mounting (if using option-B)

Note:
- Installation must be carried out by qualified
personnel only. Incorrect assembly can result in
severe personal injury and property damage (if
you intend to install this product yourself, you
must check for installations such as electrical
wiring and plumbing that may be buried inside
the wall). It is the installer's responsibility to
verify that the wall will safely support the total
load of the unit and wall brackets.
- Additional tools (not included) are required for
the installation.
- Do not overtighten screws.
- Keep this instruction manual for future
reference.
1
3
921 mm / 36.2"
2
8
A
- Use an electronic stud finder to check the wall
type before drilling and mounting.
1. Drill 2 parallel holes (Ø 5.5-6 mm each
according to wall type) in the wall. The distance
between the holes should be 921mm.
2. Insert the supplied wall anchors into 2 screw
holes on the wall. Insert the supplied wall
bracket screws through the wall brackets into
the wall anchors. Fix and tighten the screws on
the wall.
3. Remove the screws then install the wall
mounting screws into the back of the unit.
4. Hang the unit on the wall mount brackets.
4
B