Check A Program; Modify A Program - ABB D1 Manual Del Usuario

Set ANNUAL PERIOD
Enables a defined period to be set, in which the program set up previously must
be executed.
i
The period defined in the annual program is repeated cyclically every year.
P 0 2
P 0 2

2-4 Check a program

Access desired program menus (STANDARD P, CYCLIC P...) by pressing MENU.
c 1

2-5 Modify a program

1. Press OK to confirm program to be modified.
2. Set new values as described in subsection 2-3.
1. Set the start and end of the period in the format
mm/-- using keys
2. Press OK to confirm every field.
» The annual period is set.
3. Press MENU to exit programming.
1. Select the program type from the menu (e.g. RAN-
DOM P) using keys
2. Press OK to confirm.
» The programs of the same type in the memory
are displayed.
3. Select the program to be checked using keys
» The display shows the settings cyclically.
P 0 2
.
.
dd/
EN
.
11