Braun 5030s Manual Del Usuario página 11

4 On/off switch
5 Shaver display
5a Lock symbol (travel lock)
5b Battery symbol
6 Long hair trimmer
7 Shaver-to-station contacts
8 Release button for long hair trimmer
9 Shaver power socket
10 Special cord set (design can differ)
11 Protection cap
First use and Charging
Connect the shaver to an electrical outlet by snapping the special cord set (10) into the
shaver power socket (9).
Basic operating information
• A full charge provides up to 50 minutes of cordless shaving time. This may vary
according to your beard growth and environmental temperature.
• Recommended ambient temperature for charging is 5 °C to 35 °C. The battery may
not charge properly or at all under extreme low or high temperatures. Recommended
ambient temperature for storage and shaving is 15 °C to 35 °C.
• Do not expose the appliance to temperatures higher than 50 °C for extended periods
of time.
• When the shaver will be connected to an electrical outlet, it may take some minutes
until the display illuminates.
Charging / low charge
The charge status is shown in the shaver display (5).
• During charging the battery symbol (5b) will blink green.
• When the shaver is fully charged and connected to an electrical outlet, the battery
symbol will light up green for a few seconds.
• The battery symbol will flash red, when the battery is running low. You should be able
to finish your shave. With switching off the shaver a beep sound reminds of the low
charge status.
• If the shaver has run out of power (discharged), you may also shave with the shaver
connected to an electrical outlet via the special cord set.
Using the shaver
Press the on/off switch (4) to operate the shaver.
Tips for a perfect dry shave
For best results, Braun recommends you to follow 3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at the right angle (90°) to your skin.
3. Stretch your skin and shave against the direction of your beard growth.
12