Braun 5030s Manual Del Usuario página 13

Environmental notice
Product contains batteries and/or recyclable electric waste. For environment
protection do not dispose of in household waste, but for recycling take to electric
waste collection points provided in your country.
Subject to change without notice.
For electric specifications, see printing on the special cord set.
Trouble-Shooting
Problem
Shaver does
not charge
completely and
keeps blinking.
Charging does
not start when
connected to
power socket.
Unpleasant smell
from the shaver
head.
Battery perfor-
mance dropped
significantly.
Shaving perfor-
mance dropped
significantly.
14
Possible reason
Ambient temperature is
out of valid range.
1. Sometimes charging
could start delayed
(e.g. after long stor-
age).
2. Ambient temperature
is out of valid range.
3. Special cord set is not
plugged in properly.
Shaver head is cleaned
with water.
1. Foil and cutter are worn
which requires more
power for each shave.
2. Shaver head is regu-
larly cleaned with
water but not lubri-
cated.
1. Foil and cutter are
worn.
2. Shaving system is
clogged.
Remedy
Recommended ambient temperature for
charging is 5 °C to 35 °C.
1. Wait a few minutes, if charging will
start automatically.
2. Recommended ambient temperature
for charging is 5 °C to 35 °C.
3. Special cord set needs to snap into
place.
When cleaning the shaver head with
water only use hot water and from time to
time some liquid soap (without abrasive
substances). Remove Foil & Cutter
cassette to let it dry.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned with
water, apply a drop of light machine oil
on top of the foil once a week for lubri-
cation.
1. Renew Foil & Cutter cassette.
2. Soak the Foil & Cutter cassette into hot
water with a drop of dish liquid. After-
wards rinse it properly and tap it out.
Once dry apply a drop of light machine
oil on the foil.