DeWalt DW075 Traducido De Las Instrucciones Originales página 31

Batteries (fi g. 1)
BATTERY TYPE
The DW075 operates on two LR20 (D-size)
batteries.
Package Contents
The package contains:
1 Rotary laser
2 LR20 (D-size) batteries
1 Wall mount
1 Remote control
1 Target card
1 Pair of laser enhancement glasses
1 Detector
2 6LR61 (9V) batteries
1 Detector clamp
1 Kitbox
1 Grade rod
1 Tripod
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
INTENDED USE
The DW075 rotary laser has been designed to
project laser lines to aid in professional applications.
The tool can be used both inside and outside for
horizontal (level) and vertical (plumb) alignment. The
tool can also produce a stationary laser dot that can
be directed manually to establish or transfer a mark.
The applications range from drop-ceiling installation
and wall layout to foundation leveling and deck
building.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
This laser is a professional tool. DO NOT let children
come into contact with the unit. Supervision is
required when inexperienced operators use this
laser.
LASER (FIG. 1)
a. Battery compartment
b. Battery icon
c. Carrying handle
d. Rotary laser head
e. Power button
f. Power/low battery LED indicator
g. Low battery icon
h. Speed/rotation button
i. Scan mode button
j. Directional arrow: up
k. Directional arrow: down
REMOTE CONTROL (FIG. 1)
l. Manual mode button
m. Directional arrows: up/down
n. Directional arrows: left/right
o. Speed/rotation button
p. Scan mode button
WALL MOUNT (FIG. 2)
q. Mounting base
r. Base mounting hole
s. Base mounting slot
t. Mounting knob
u. Scale
v. Clamp lever
w. Clamp jaws
x. Mounting hole
y. Locking knob
Unpacking
FITTING THE WARNING LABEL
The safety warnings on the label shown on the laser
must be formulated in the language of the user.
For that purpose, a separate sheet of self-adhesive
labels has been supplied with the tool.
WARNING: Check that the safety
warnings on the label have been
formulated in your language.
The warnings should read as follows:
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
• If the warnings are in a foreign language,
proceed as follows:
– Remove the required label from the sheet.
EN GL IS H
29