Changing The Inner Lightbulb; Starting Your Fridge - NewAir NRF031BK00 Manual Del Propietário

CHANGING INNER LIGHT BULB
1. Disconnect the power supply before replacing the light bulb.
2. First, hold and remove the light bulb cover.
3. Next, remove the old bulb by unscrewing it counterclockwise. Then replace
with a new bulb (max 15W) by screwing it in clockwise. Make sure it is
secured in the bulb holder tightly.
Reassemble the light cover and reconnect your fridge to the power supply.
4.

STARTING YOUR FRIDGE

www.newair.com
● Before connecting the refrigerator to the
power supply, allow the refrigerator to
settle into place for half an hour.
● Before putting any fresh or frozen foods,
the refrigerator must have run for 2-3
hours or above 4 hours in summer when
the ambient temperature is high.
● Leave enough space for the doors and
drawers to easily open and around for
proper airflow.
EN
17