Tabla de contenido
Publicidad
ASSEMBLY INSTRUCTIONS
1. Shut off the water supply and remove the
old faucet.
2. Install the faucet:
a. Unscrew the preassembled rubber
washer (C), metal washer (D), and nut
(E) from the faucet (A).
b. Place the faucet (A) over the sink and
insert the shank (B) into the selected
hole in the sink.
c. From underneath the sink, re-attach
and hand tighten the rubber washer
(C), metal washer (D), and nut (E).
Lock nut (E) into position by tightening
screws (F).
3. Connect a 1/2 in. IPS faucet connector or
coupling nuts (not included) with 3/8 in.
O.D.ball-nose risers (not included) to the
water supplies underneath the sink using
wrenches (not included).
Note: Refer to the local plumbing codes for
permissible types of water supply connectors.
1
2
3
4
A
B
C
D
E
F
Publicidad
Tabla de contenido
