Descargar Imprimir esta página

Axis Q17 Serie Guia De Instalacion página 27

Ocultar thumbs Ver también para Q17 Serie:

Publicidad

English
Safety information
Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NO TICE
TICE
NO
NO
TICE
Indicates a situation which, if not avoided, could result in
damage to property.
Other message levels
Important
Indicates significant information which is essential for the
product to function correctly.
Note
Indicates useful information which helps in getting the
most out of the product.
Safety instructions
NO TICE
TICE
NO
NO
TICE
The Axis product shall be used in compliance with local
laws and regulations.
Store the Axis product in a dry and ventilated
environment.
Avoid exposing the Axis product to shocks or heavy
pressure.
Do not install the product on unstable poles, brackets,
surfaces or walls.
Use only applicable tools when installing the Axis
product. Using excessive force with power tools could
cause damage to the product.
Do not use chemicals, caustic agents, or aerosol cleaners.
Use a clean cloth dampened with pure water for
cleaning.
Use only accessories that comply with the technical
specification of your product. These can be provided by
Axis or a third party. Axis recommends using Axis power
source equipment compatible with your product.
Use only spare parts provided by or recommended by
Axis.
Do not attempt to repair the product yourself. Contact
Axis support or your Axis reseller for service matters.
The power supply shall be plugged in to a socket outlet
installed near the product and shall be easily accessible.
Use a limited power source (LPS) with either a rated
output power limited to ≤100 W or a rated output
current limited to ≤5 A.
Transportation
NO
NO TICE
NO
TICE
TICE
When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the
product.
Battery
The Axis product uses a 3.0 V CR2032 lithium battery as the
power supply for its internal real-time clock (RTC). Under
normal conditions this battery will last for a minimum of
five years.
Low battery power affects the operation of the RTC, causing
it to reset at every power-up. When the battery needs
replacing, a log message will appear in the product's server
report. For more information about the server report, see
the product´s web page or contact Axis support.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl
ether (EGDME), CAS no. 110-71-4.
WARNING
Risk of explosion if the battery is incorrectly replaced.
The battery should be replaced with an identical battery
only.
Used batteries should be disposed of according to local
regulations or the battery manufacturer's instructions.
Français
Informations sur la sécurité
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas
évitée, entraînera le décès ou des blessures graves.
AVERTISSEMENT
Indique une situation dangereuse qui, si elle n'est pas
évitée, pourrait entraîner le décès ou des blessures graves.
ATTENTION
Indique une situation dangereuse qui, si elle n'est pas
évitée, pourrait entraîner des blessures légères ou modérées.
A A A VIS
VIS
VIS
Indique une situation qui, si elle n'est pas évitée, pourrait
endommager l'appareil.
Autres niveaux de message
Important
Indique les informations importantes, nécessaires pour
assurer le bon fonctionnement de l'appareil.
Note
Indique les informations utiles qui permettront d'obtenir le
fonctionnement optimal de l'appareil.
Consignes de sécurité
A A A VIS
VIS
VIS
Le produit Axis doit être utilisé conformément aux lois
et règlements locaux.
Conserver ce produit Axis dans un environnement sec
et ventilé.
Ne pas exposer ce produit Axis aux chocs ou aux fortes
pressions.
Ne pas installer ce produit sur des poteaux, supports,
surfaces ou murs instables.
Utiliser uniquement des outils recommandés pour
l'installation de l'appareil Axis. L'application d'une force

Publicidad

loading

Este manual también es adecuado para:

Q1785-leQ1786-le