Careless Use Hazards; Careless Operation Hazards-Vital Information For Operator Personnel (See Also Operator Hazards Throughout Manual); Careless Servicing Hazards-Vital Information For Service Personnel (See Also Service Hazards Throughout Manuals) - Milnor 42044 Manual Del Usuario

For All Users
2.4.2

Careless Use Hazards

2.4.2.1 Careless Operation Hazards—Vital Information for Operator
Personnel (see also operator hazards throughout manual)
WARNING: Multiple Hazards — Careless operator actions can kill or injure person-
warranty.
Do not tamper with or disable any safety device or operate the machine with a mal-
�
functioning safety device. Request authorized service.
Do not operate a damaged or malfunctioning machine. Request authorized service.
�
Do not attempt unauthorized servicing, repairs, or modification.
�
Do not use the machine in any manner contrary to the factory instructions.
�
Use the machine only for its customary and intended purpose.
�
Understand the consequences of operating manually.
�
2.4.2.2 Careless Servicing Hazards—Vital Information for Service
Personnel (see also service hazards throughout manuals)
WARNING: Electrocution and Electrical Burn Hazards — Contact with electric
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING: Entangle and Crush Hazards — Contact with moving components nor-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING: Confined Space Hazards — Confinement in the cylinder can kill or injure
12
nel, damage or destroy the machine, damage property, and/or void the
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
Do not service the machine unless qualified and authorized. You must
�
clearly understand the hazards and how to avoid them.
Abide by the current OSHA lockout/tagout standard when lockout/tag-
�
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
Do not service the machine unless qualified and authorized. You must
�
clearly understand the hazards and how to avoid them.
Abide by the current OSHA lockout/tagout standard when lockout/tag-
�
you. Hazards include but are not limited to panic, burns, poisoning, suffo-
cation, heat prostration, biological contamination, electrocution, and
crushing.
Do not enter the cylinder until it has been thoroughly purged, flushed,
�
drained, cooled, and immobilized.
BNWVUS04.C05 0000235127 A.3 A.7 12/11/20 8:32 AM Released
BNWVUS04.C06 0000235126 A.3 A.7 A.4 12/11/20 8:32 AM Released
BNWVUS04.C07 0000235125 A.3 A.7 A.4 12/11/20 8:32 AM Released
Pellerin Milnor Corporation