EN
A
How to use
A-1
How to regulate the temperature
Turn the temperature regulating handle.
With the "40" mark as a guideline, set the safety button to match your
preferred temperature.
In order to turn on hot water over 40°C
turn the handle while pressing the safety button.
The safety button will lock near a point that exceeds the "40" mark.
When you wish to have water come out at a higher temperature, turn the
handle while pressing the safety button.
After pressing the safety button and using water at a high temperature, be
sure to return the handle to under the "40" mark.
A-2
Turn on/off the cold (hot) water.
Model TBV02404
Turn the switching handle to the right or left.
Water will come out of the connected fitting.
Also, turning the handle fully to the left (right) will release the maximum
flow of water.
* The direction of turning the handle will vary according to the fixing
attachment.
Model TBV02403
Turn the open/close handle to the left.
Water will come out of the connected fitting.
Also, turning the handle fully to the left will release the maximum flow of
water.
Model TBV02404
Return the switching handle to the "
The water will stop.
Model TBV02403
Turn the open/close handle to the right.
The water will stop.
Operate the switching handle and open/close handle slowly. The water
hammer phenomenon may occur.
" position.
27