Basic Application - WEG CFW100 Manual Del Usuario

First Time Power-Up and Start-Up

5.2.1 Basic Application

Seq Display Indication/Action
„
Initialization mode.
1
„
Press key to enter the first level of the
parameterization mode.
„ Press keys or
P100.
3
„
If necessary, change the content of
"P101 – Deceleration Time".
„
Use key to select the parameter P133.
5
„ If necessary, change the content of
"P134 – Maximum Speed".
„
Press key for the next parameter.
7
„ Press key to view the parameter content.
9
„ Press key . The motor will decelerate to
a stop.
30 | CFW100
Seq
2
to select the parameter
4
6
8
10
Figure 5.2: Sequence for basic application
Display Indication/Action
„
Press key if you need to change the content
of P100 – "Acceleration Time" or press key
for the next parameter.
„
If necessary, change the content of
"P133 – Minimum Speed".
„
Press key for the next parameter.
„ If necessary, change the content of
"P135 – Output Maximum Current".
„
Press key to select parameter P002.
„ Press key that the motor will accelerate up
to 3.0 Hz (factory default setting of
P133 – Minimum Frequency).
„ Press and hold it until it reaches 60.0 Hz.
„
When the motor stops, the display will indicate
"ready".