Aurora AU814XB Manual Del Usuario página 3

OPERATION :
FIGURE 2
ShredSafe™ technology is an added safety feature incorporated in this particular model. It is a
new technology where the shredder is able to detect forced entry and automatically cuts the power off,
preventing further shredding.
To begin shredding, locate the switch on the unit and select the "Auto" mode (FIGURE 2). The Green LED
light indicates the shredder is "On" and ready to use. Press the designated "push open" area on the handle
of the cover to tilt open and expose the paper feed slot (FIGURE 3).
The cover will click into a preset position for safe shredding.*
With the feed slot now open, you can shred sheets of paper or 1 credit card per pass (FIGURE 3).
When shredding is completed, you can press the designated "push close" area on the cover to tilt shut
the paper feed slot (FIGURE 4). It is recommended to have the paper feed slot closed when shredder is
not in use. This will prevent any objects from getting into the feed slot and accidentally shredded.
*Be sure to not tilt open the cover completely beyond the preset position, otherwise the
ShredSafe™ power cut off feature will be activated and the shredder will be inoperable.
I
Auto: This setting allows the shredder to be automatically started by inserting paper into the
shred opening. Always feed the paper in as straight as possible. When the paper has
passed through, the shredder will automatically stop. (FIGURE 2)
O
Off: This setting turns off all features of the shredder. For safety reasons, we recommend that
you leave the shredder in the "Off" position whenever the shredder is unattended or
not in use. (FIGURE 2)
R
Rev: In the unlikely event of a paper jam, the reverse setting can be used to help clear the
cutters of paper that has not passed through. Never attempt to clear a jam by using
the reverse function until you have emptied the wastebasket. (FIGURE 2)
Ready : The shredder is operational and Ready for use.
4
Continued on next page
FIGURE 3
FIGURE 4
OPERATION :
Never shred plastic (except credit cards), any hard materials, continuous forms,
newsprint, or anything with adhesives including labels and envelopes.
While this shredder will shred staples, it is recommended that you remove them whenever possible in
order to extend the life of your shredder.
Only shred credit cards by feeding them vertically within the designated area.
Never feed more than one credit card at a time.
MAINTENANCE :
We recommend you oil your shredder once a month with vegetable or cooking oil (nothing petroleum
based). Drizzle some oil on a few pieces of paper and feed those pages through the shredder.
Do not spray or keep any aerosol products in or around shredder.
DO NOT USE CANNED AIR ON SHREDDER.
CLEANING :
• ALWAYS UNPLUG THE SHREDDER BEFORE CLEANING!
• Only clean the shredder by carefully wiping the unit with a dry soft cloth or towel.
• Do not clean or immerse shredder in water. Having the unit wet may result in
damage or malfunction to the electrical components. If the shredder happens to get
wet, be sure to completely dry the unit immediately with a cloth or towel.
• Never use anything flammable to clean the shredder.
This may result in serious injury or damage to the product.
WARNING :
!
Avoid touching the document
feed opening with hands.
Product is not intended for use by
children (product is not a toy).
Do not insert foreign objects into
the document feed opening.
Do not spray or keep any aerosol
products in or around shredder.
Avoid loose clothing or jewelry
touching the document feed opening.
Avoid getting hair near the
document feed opening.
5
Continued on next page