dirna Bergstrom Bycool Split Instrucciones De Montaje página 17

SPLIT
CONDENSER
1- Position the condenser in the required
place, make the boreholes and secure with
the supplied screws.
1
PIPING AND CABLE CONNECTION
1- Connect the pipes and cabling, passing
them through the most appropriate place
in order to prevent any sharp edges or
twisting.
Clamps and screws are supplied to secure
the cables and piping; make sure these are
protected with edgebands and sleeves.
Discard the excess cabling in an appropriate
place.
SEE CABLE AND PIPING CONNECTION
DIAGRAMS
Air conditioning for vehicles
1
17
EN