Metra 95-7810B Instrucciones De Instalación página 3

1. Attach the radio trim panel brackets
to the radio trim panel using (4)
#6 x 3/8" Phillips screws supplied.
(Figure A)
2. Attach the rear support bracket
to the radio trim panel brackets
using (4) #6 x 3/8" Phillips screws
supplied. (Figure B)
3. Slide the radio into the completed
assembly, and then secure it to the
assembly using the screws supplied
with the radio. (Figure C)
Kit Assembly
(Figure A)
(Figure B)
95-7810B
4. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
5. Reassemble the dash in reverse
order of disassembly.
3
(Figure C)