Bosch TCE 4530 Instrucciones De Réparation página 20

en 20 | TCE 4530 | Symbols Used
Contents
1. Symbols Used
1.1 Documentation
1.2 TCE 4530
2. Malfunction
3. Adjustments
3.1 Adjustment or replacement of the transmission
belts
3.2 Replacement of the inverter spring
3.3 Adjustment of the transmission belts
3.4 Replacement of pedal box parts
3.5 Adjustment of the bead-breaker arms and repla-
cement of the sliders
3.6 Tool replacement
3.7 Replacement of the helicoid of the tool holding
arm
3.8 Tool adjustment and AUTO button setting
3.9 Self-centering chuck sliding table adjustment 24
3.10 Single-phase electrical system
3.11 Three-phase electrical system
(230V and 400V)
4. Hydraulic oils comparison table
5. Suggested spare parts and tools
|
1 695 104 942 2008-10-17
1. Symbols Used
1.1 Documentation
20
20 Pictograms linked with the key words Danger, Warning
20 and Caution are warnings and always indicate an imme-
diate or potential hazard to the user.
21
Danger!
22 Immediate danger that could cause serious
personal injury or death.
22
22 Warning!
22 Potentially dangerous situation that could
22 cause serious personal injury or death.
23 Caution!
23 Potentially dangerous situation that could
cause personal injury or damage to property.
23
23
!
Important - warns of a potentially hazardous situati-
25 on in which the TCE 4530, the test sample or other
object in the vicinity could be damaged.
30
In addition to these warnings, the following symbols are
35 also used:
i
35 Info - In addition to these warnings, the following
symbols are also used.
€
Single-step procedure
that can be completed in just one step.
« Intermediate result
displayed during a procedure.
"
Final result - the final result is displayed at the end
of the procedure.
1.2 TCE 4530
Disposal
Old electrical and electronic devices, including
cables and accessories or batteries must be
disposed of separate to household waste.
- instructions for a procedure
- an intermediate r esult is
Robert Bosch GmbH