Features - Surtek SI410A Manual De Usuario

WARNING: The operation of any power tool
can result in foreign objects being thrown into
your eyes, which can result in severe eye dam-
age. Before beginning power tool operation,
always wear safety goggles or safety glasses
with side shields, or a full face shield when
needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye pro-
tection which is marked to comply with ANSI
Z87.1.

FEATURES

KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
1
10
9
8
7
1. FRONT HANDLE
2. ON/OFF SWITCH
3. BEVEL SCALE
4. BEVEL LOCK KNOB
5. MITER TABLE
6. MITER SCALE
7. WORK CLAMP
8. FENCE
9. MITER LOCK LEVER
10. DUST BAG
IMPORTANT: Before attempting to use this
product, familiarize yourself with all operating
features and safety requirements.
20
2
4
3
5
6
10 in. BLADE
A 10 in. saw blade is included with your com-
pound miter saw. It will cut materials up to 2
in. thick or 6 in. wide, depending upon the
angle at which the cut is being made.
MITER LOCK LEVERS
The miter lock levers
securely lock the saw
table at the desired
miter angles.
SPINDLE LOCK BUTTON
A spindle lock button has been provided for
locking the spindle which keeps the blade in
your saw from rotating.
Depress and hold the lock button while install-
ing, changing, or removing blade.
TRIGGER LOCK
To prevent unau-
thorized use of your
compound miter saw,
we suggest that you
disconnect it from the
power supply and lock
the switch in the off
position. To lock the
switch, install a pad-
lock (not included)
through the hole in
the switch trigger.
A lock with a long shackle up to 9/32 in. diam-
eter may be used. When the lock is installed
and locked, the switch is inoperable. Store the
padlock key in another location.
WARNING: The operation of any saw can re-
sult in foreign objects being thrown into your
eyes, which can result in severe eye damage.
Before starting power tool operation, always
wear safety goggles or safety glasses with side
shields and a full face shield when needed. We
recommend wide vision safety mask for use
over eyeglasses or standard safety glasses with
side shields.
BEVEL LOCK KNOB
The bevel lock knob securely locks your com-
pound miter saw at desired bevel angles.
A positive stop adjustment screw has been
Miter lock levers
Switch
Spindle
Lock
Button