Replacing The Cutting Unit; Assistance; Battery Removal - Philips Norelco T800 Manual De Instrucciones

12. ENGLISH
C
4 Clean the cutting unit and the inside of the
Trimmer with the brush supplied.
C
5 Close the cutting unit by pushing it back
into place on the Trimmer until you hear a
click.

REPLACING THE CUTTING UNIT

If your cutters become damaged or worn,
do not continue using the Trimmer.
Replace cutters immediately.
1 Open the cutting unit.
C
2 Remove the old cutting unit by pulling it
upwards.
C
3 Place the two notches of the new cutting
unit into the guiding slots.
4 Push the cutting unit back onto the
Trimmer until you hear a click.
ENGLISH

ASSISTANCE

For assistance or the Authorized Norelco Service
Location nearest you, call toll free:
1-800-243-3050
or visit our website: www.norelco.com
Authorized Norelco Service Location information
is available 24 hours a day, 7 days a week.

BATTERY REMOVAL

This Norelco Trimmer contains rechargeable
Nickel-Cadmium batteries, which must be
disposed of properly.
Batteries should only be removed when
Trimmer is to be discarded.
Refer to Battery Removal instruction sheet
for directions on removing the rechargeable
batteries.
13.