Chauvet DJ EZwash HEX Pack Guía De Referencia Rápida página 7

EZwash™ HEX Pack QRG
IRC-6 Operation
(Cont.)
Manual Color Control
To manually control the RGBAW+UV percentage:
1. Press <MANUAL> on the IRC-6.
2. Press <R>, <G>, <B>, <W>, <A>, or <UV> (red, green, blue, white, amber,
or ultraviolet) to choose your color.
3. Press <+> or <–> to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press <STROBE> on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe.
To dim the light output:
1. Press <%>
2. Press <+> or <–> to brighten or dim the light output.
To fade the light output:
·
Press <FADE> on the IRC-6.
To adjust the speed of the fade:
1. Press <SPEED> on the IRC-6.
2. Press <+> or <–> to either increase or decrease the speed of the program.
To black out the lights:
·
Press <BLACK OUT> on the IRC-6. This will blackout the light until the
button is pressed again.
The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing <BLACK
OUT>. You may have inadvertently activated Black Out.
7
EN