Seat Functions And Operation; Weight Adjustment; Height Adjustment; Seat Pan Angle Adjustment - Grammer MAXIMO XT DYNAMIC PLUS Manual De Instrucciones

max.
min.
GB

Seat functions and operation

Weight adjustment

The seat must be adjusted for the driver's
weight by briefly pulling the adjustment lever
of the automatic weight and height adjuster
with the vehicle at a standstill and the driver
sitting on the seat.
To prevent damage to the health, the
setting for the driver's weight must be
checked and adjusted individually before the
vehicle is driven.

Height adjustment

The seat height can be set pneumatically and
is continuously adjustable.
The seat height can be altered by pulling or
pushing the adjustment lever fully up or down
(arrow). If the adjustment reaches the top or
bottom end stop, the height is adjusted
automatically in order to guarantee a
minimum spring travel.
In order to avoid damage, do not operate
compressor for more than 1 minute.

Seat pan angle adjustment

The angle of the seat pan can be individually
adjusted.
To adjust the angle of the seat pan, pull the
left handle upwards. By exerting pressure on
or off the front or rear part of the seat pan it
can be moved to the desired angle position.
23