Maintenance Instructions - Desoutter SC2-065A500-R4Q Manual De Instrucciones

English
ACCESSORIES
All accessories are available in the following
catalogues:
● Industrial tools
- UK 2050484013
- FR 2050484023
- GER 2050484033
- SP 2050484043
- IT 2050484053
- US 2050484063
- PORT 2050499023
- RUS 2050499013
- CHIN 2050499033
- KOR 2050519203
- MEX 2050519213
LUBRICATION
This is a DRYLINE tool designed to
operate on a totally dry air line i.e.
one without any oil or water moisture.
DRYLINE tools can also operate on a
lubricated or partly lubricated air line thus
allowing easy interchangeability with
existing installations.
If lubrication is required an air line
lubricator should be fitted down stream
of the filter.
Use ISO VG 15 (27652).
Note: full power is achieved using a
lubricated air supply.
11/2014

MAINTENANCE INSTRUCTIONS

The use of spare parts/accessories
other than those originally supplied
by the manufacturer may result in a
drop in performance and/or increased
maintenance / noise level / vibrations,
and as the result, the full cancellation of
the manufacturer's liability.
● Service should be carried out at
intervals of 1000 hours use.
● All torque figures ± 10%.
● Rubber surfaces should be wiped
clean with a general purpose, non
aggressive degreasant.
When disposing of components,
lubricants, etc... ensure that the relevant
safety procedures are carried out.
Never connect a part assembled tool to
the air supply. The rotor blades in this
tool have a PTFE content. The normal
health and safety recommendations
concerning PTFE must be observed
when handling these rotor blades.
● Do not smoke.
● Motor components must be washed
with cleaning fluid and not blown clear
with an air line.
● Wash hands before commencing any
other activity.
21 / 88
6159933830_07
Series: D