Detergent Cleaning Procedure - Schneider SLA 6100 Manual De Usario

To stop the flow:
Tighten the drain filter.
When no more water comes out:
Unscrew and pull out the entire filter.
Clean the filter.
Figure 21
Verify that the drain pump propeller rotates
easily. Remove any debris and clean the inside
if there should be any.
Replace the drain pump filter and screw it firmly.
!
Warning! If the fil-
ter is not reinserted or
screwed
could spill from the ma-
chine.
It is useful to frequently clean the inlet filter
placed inside to the hose set. Same calcium
residual or metallic oxidation residual can
obstruct the water coming in.
26
tightly, water
DEtErgEnt DraWEr clEaning
Having removed the detergent drawer, take
away the steam vent plate as shown in photo
below.
Figure 22
a
b
c
If it is clogged by foreign bodies or detergent, it
is advisable to break it small fragments taking
care not to push the lumps to the bottom to
prevent clogging of the internal circuit. Note
that the detergent is removed easily if treated
with hot water.