Operation Of The Appliance; Switching The Appliance On And Off; Switching The Cooking-Zones On And Off - Schneider SVTIN325 Instrucciones De Instalación Y Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION OF THE APPLIANCE

Use the induction cooking zones with suitable cookware.
After mains voltage is applied, all displays are come on for a moment. When this time is over, the
hob is in the stand-by mode and it is ready for operation.
The hob is controlled with electronic sensors which are operated by touching the related sensors.
Each sensor activation is followed by a sound signal (buzzer).
Switching the appliance on:
Switch the hob on by touching ON/OFF key
bottom right dots blink. (If no cooking-zone is selected within 20 seconds, the hob will automatically
turn off.)
Switching the appliance off:
Switch the hob off at any time by touching
ON/OFF key
has always priority in the switch off function.
Switching the cooking-zones on:
Touch the heater selection key you wish to cook on. There is a static dot indication on the selected
heater display and the blinking dot on all other displays extinguish.
Select the temperature setting by using the heater selection key or decrease heat setting key
The element is now ready to cook on. For quickest boil times, select desired cooking level and
then touch the P key to activate Boost function.
Switching the cooking-zones off:
Select the element you want to switch off by pressing the heater selection key. Using
the temperature down to ''0''. (Also using
''0'')
If the cooking zone is hot, "H" will be displayed instead of "0".
. All heater displays show a static "0" and the
.
and
keys simultaneously turns the temperature to
6
.
key, turn

Publicidad

Tabla de contenido
loading

Tabla de contenido