Residual Heat Indicator - Schneider SVTIN325 Instrucciones De Instalación Y Funcionamiento

Switching all cooking-zones off:
To turn all the cooking zones off at once, touch the
In the stand-by mode, an "H" appears on all cooking zones which are hot.

Residual heat indicator:

Residual heat indicator indicates that the glass ceramic has a dangerous touch temperature
in the circumference of a cooking zone.
After switching off the cooking zone, the respective display shows "H" until the assigned
cooking zone temperature is in an uncritical level.
Smart Pause
Smart Pause, when activated, reduces the power of all burners that have been switched on.
If you then deactivate the Smart Pause, the heaters will automatically return to the previous
level.
If the Smart Pause is not de-activated, the cooktop will turn off after 30 minutes.
Touch (II) to activate Smart Pause. The power for the activated heater(s) will reduce to level
1 and "II" will appear at all displays.
Touch (II) again to deactivate Smart Pause. "II" will disappear and the heaters will now run
at the level previously set.
key.
7