Adjusting The Image - Yamaha DPX-1300 Manual De Instrucciones

Carry out the following adjustments to obtain optimal projection conditions.
Using test patterns to adjust the projection image – PATT button
The DPX-1300 is equipped with three test patterns, the crosshatch pattern necessary for focus and keystone adjustment, and the grayscale
and color bar patterns necessary for adjusting image quality.
AUTO
V. POS ZOOM FOCUS
IRIS SETTING PATT
MENU
ESCAPE
STANDBY/ON
PATTERN button
ESCAPE MENU
PATTERN
ASPECT INPUT
LAMP COVER TEMP FAN
Adjusting the vertical position – V.POS button
If the center of the screen is not in line with the center of the lens of the DPX-1300, use the V.POS button to adjust the position of the image
up or down. You can adjust the image to a maximum of half of the height of the projection screen.
AUTO
V.POS
V. POS ZOOM FOCUS
button
IRIS SETTING PATT
ESCAPE MENU
STANDBY/ON
ESCAPE button
ESCAPE MENU
PATTERN
ASPECT INPUT
LAMP COVER TEMP FAN

Adjusting the image

1. Press the PATT button on the
remote control, or the PATTERN
button on the main unit.
2. Press the + or - button to select
PATT
the necessary pattern.
button
3. To exit from the test display,
press the PATT or PATTERN
button.
SETTING
1. Press the V.POS button on the
remote control, or press the
SETTING button on the main unit
repeatedly to select [Lens Shift]
from the display menu.
2. Press the h or g button to move
the projected image to a suitable
place.
3. To exit from the adjustment
SETTING
mode, press the V.POS or
button
ESCAPE button.
SETTING
Crosshatch pattern
Grayscale pattern
Color bar pattern
Lens Shift
25
8