Start The Washer; Easy Control Microprocessor With Keypad And Mechanical Buttons (Mcb Ec); Full Control Microprocessor (Mcb Fc) - LAVAMAC LH60-165 Manual De Uso

Standard wash programs versus custom made wash programs.
This explanation is only valid for standard wash programs. For custom made programs, it's possible that
other dispensers have been selected. (See programming manual)
:
Remark - It is advisable to use only detergents with "foam breaker" which can easily be found in retail shops.
The dosage of soap to use is generally mentioned on the packing. An overdose of detergent
can lead to poor wash results and "suds" overflow which can damage the machine.
- Take care that the lid of the soap dispenser is closed if the machine starts.

4.7. START THE WASHER

4.7.1. EASY CONTROL MICROPROCESSOR WITH KEYPAD AND MECHANICAL
BUTTONS (MCB EC)
4.7.1.1. COIN OPERATED MODELS
Use the left lock key of the top cover to switch between run mode and programming mode. You will activate
the microswitch by this key.
4.7.1.2. NON-COIN OPERATED MODELS
Use the left lock key of the top cover to switch between run mode and programming mode. You will activate
the microswitch by this key.

4.7.2. FULL CONTROL MICROPROCESSOR (MCB FC)

SELECT PROCESS
After selecting the desired wash program number, by pressing the START button the wash cycle will be started.
If there is no washing program available for the selected program number, INVALID will be displayed.
Once the program has been started, the name of the selected wash program will be displayed for a few seconds.
PrXX StYY ZZ.Z Min
Sequence
XX : The program number
YY : The program step number
ZZ.Z : The remaining program time in 1/10 of Minutes or 1/10 of Hours.
Sequence : The executed Sequence.
: A row of bars shows the remaining sequence time
Attention!!!
The program can only be started when the key switch is in Run Mode.
12
A. After choosing the program with the PROGRAM SELECT button,
throw the right amount of coins in the slot indicated on the lower
display The display shows the remaining amount that has to be
thrown in. If the display shows 00, the washer extractor can be
started. The little light by the start button will be flashing.
B. Push the START button to start the washer extractor. When you
have selected a wrong washing program, you can change it
during the first 150 seconds of the program by pushing the
SELECT button. When a more expensive washing program was
chosen, the value will be shown to add. When you don't add more
coins, the chosen program at the start will be executed.
C. During the washing cycle you can follow the actual washing
sequence and the remaining time on the displays.
A. After choosing the program with the PROGRAM SELECT button,
push the START button to start the washer extractor.When you
have selected a wrong washing program, you can change it
during the first washing step by pushing the SELECT button.
B. During the washing cycle you follow the actual washing sequence,
the remaining time and if been set the temperature on the displays.
C. If the advance function has been set by the installator, you can go
on to the next step by pushing the START button.
X X
USER´S MANUAL 100246 G PUBLICATION DATE 11 DEC 2007.DOC