Operate The Treadmill; Compatible Fitness Application - EGOFIT WALKER PRO Manual De Usuario

OPERATE THE TREADMILL

Make sure that the treadmill is correctly connected to a power source. Touch the red button
behind the motor cover from o to 1 and switch on the power. You will hear a signal and the
LCD screen will light up.
1. START:
The treadmill is in stop state, press START/STOP key of remote controller, start the tread-
mill. The initial speed is 1.0kmh/0.62mph.
2. STOP:
The treadmill is in running state, press START/STOP key of remote controller, pause
running.The former exercise data will remain, and when press button START/STOP again to
start the treadmill , the exercise data will add up.
3. ADJUST THE SPEED:
The treadmill is in running state, press "+" and "-" keys of remote controller to speed up or
speed down.
4. MANEUVERABLE WHEELS:
There are two maneuverable wheels beneath the end of motor side for you to move the
walking treadmill with effort saving.
5. RF remote controller
START/STOP: start or pause the motion of treadmill
SPEED UP: increase the speed value
SPEED DOWN: reduce the speed value
6. RESET
Stop the treadmill and restore the default setting.
7. CUSTOM
Customize the wanted exercise time, exercise distance, or exercise calories.
Before start the treadmill, press button CUSTOM to enter the mode of CUSTOM, then
press button + or button - to adjust the wanted exercise range(time, distance, or calories).
SPEED UP
START/STOP
SPEED DOWN
CUSTOM
RESET
※Tips: Applicable Power Supply for Remote Controller
Button Cell type: CR2025 3V
Your remote controller contains a button cell with full
electricity supply. Once the button cell runs out of power,
you will need to replace the cell with new one.

COMPATIBLE FITNESS APPLICATION

You can download the app using the QR codes shown here or search in your store. Minimum
compatibility specifications for mobile device; android 5.0 or higher with Bluetooth 4.0, iOS
8.0 or higher.
Notes on using the App:
As an android user, please make sure that under "Settings -> Device Security" the "Unknown
sources" is set by ensuring it is ticked.
Please remember to turn on the Bluetooth feature on your device.
Android
21
FitShow IOS
22