Instructions Manual
Most common problems
Problem
The unit doesn't achieve
the programmed
temperature?
The lighting doesn't work?
It has noise increase?
It has spill of water?
Mural Columbus
Possible cause
The condenser is dirty.
Excess of products.
The evaporator is blocked with ice.
The lighting switch on the control panel is off.
The starters or the bulbs are damaged.
The electrical circuit is damaged.
The compressor is damaged.
The evaporator is blocked with ice.
Check the connections.
Resolution
Contact the technical agent.
Remove some products.
Defrost the unit.
Turn on the lighting switch on
the control panel.
Change the starters or the
bulbs.
Contact the technical agent.
Contact the technical agent.
Defrost the unit.
Contact the technical agent.
29
EN