Water Supply - Catalonia Aqua Spa Manual De Instalación

START-UP
The spa has a filling system that works using a ball cock. The outlet of the ball cock must be
connected to the mains supply at a constant water pressure.
When the spa loses water as a result of evaporation, the system automatically fills the tanks.
The compensation tanks have a safety outlet for removing water.
THE COMPENSATION TANKS OF PRIVATE OVERFLOW SPAS HAVE A LIMITED CAPACITY.
THEY CAN HOLD 280 LITRES OF WATER, EQUIVALENT TO 4 PARTIALLY SUBMERGED PEOPLE.
USERS SHOULD ENTER THE SPA ONE BY ONE AND SLOWLY TO ENABLE THE TANKS TO ABSORB THE
DISPLACED WATER AND PREVENT WATER FROM FLOWING OUT OF THE SPA.
During the filling process, water should be prevented from entering electrical parts.
If seawater is used in the Spa, the circuit components will quickly deteriorate.
Do not fill the Spa with hot water, as this could trigger off the safety thermostat and
Once the Spa has been filled with water, connect the electrical equipment by placing the differential
switch in the On position (See Electrical Connection).
Do not use the Spa without first carefully reading all the information detailed in the following
points:
WARNING
WARNING
damage equipment and connections.

WATER SUPPLY

SAFETY OUTLET
ENG
21