Interface; Tips - habita blue 5161-LED Serie Manual Del Usuario

6. INTERFACE

RS232 Connection
Balance (9 pins)
RXD (Input) 2-----------------------------------3
TXD (Output) 3-----------------------------------2
GND (Ground) 5------------------------------------5
Boardrate
Default boardrate is 2400BPS, options 1200, 2400, 4800, 9600, 19200, 115200
Boardrate setting
Press and hold key MENU to show C3-X (X means the number). Then, press COU to choose
a different number.
When C3-2 shows, indicating 2400BPS
When C3-3 shows, indicating 4800BPS
When C3-4 shows, indicating 9600BPS
When C3-5 shows, indicating 19200BPS
When C3-6 shows, indicating 115200BPS
Release key MENU when the desired boardrate shows, press key CAL thrice to confirm set.
Data format: 10 bits, 0 as start bit, 1 as stop bit, 8 digits (ASCII code).
Rity bit, No.
Output data format
1 2 3
Typ Space Space
e or *

7. TIPS


Warming up is necessary before any operation is made to the balance

In TARE mode, the value of the taring object cannot exceed the rated maximum capacity
of the balance

Calibration is necessary to ensure a reliable weighting

Switch off the balance when it is not used

It is suggested to turn the round pan clockwise before taking it off the balance

Never use scourers or substances that can grate to clean metallic parts such as stainless
steel, aluminum, coatings, etc. as they damage the balance and produce an early ageing of
the equipment. Use a fluff-free cloth dampened with soaped water that does not contain
abrasives
Printer/ PC (9 pins)
4 5 6 7
+ /- data data data
16
8 9 10 11
data data data data
or or
dot dot
12 13 14 15
data uni unit End
t
16
Return