Descargar Imprimir esta página

Microsonic EPT 800 Serie Manual De Instrucciones página 23

360 0 calefactor infrarojo eléctrico

Publicidad

Idiomas disponibles

Idiomas disponibles

(7)
Connect the remaining segment (for Free-Standing Models only) of the center pole (standing
tube), align the screw holes on the segments of the center pole and secure the same with the
remaining screws provided as shown in Drawing 3 and, after all three (3) screws are in place,
tighten the screws to secure the segment(s) properly
(8)
Erect both the base assembly and the heating element assembly vertically, connect the heating
element wiring to the base wiring with the electric plugs at the ends of such wirings, tidy the
electric wirings and place them inside the center pole as shown in Drawing 4.
(9)
Align the screw holes on these two (2) segments of the center pole and connect these segments
of the center pole to each other and secure the same with three (3) of the screws provided as
shown in Drawing 4 and, after all three (3) screws are in place, tighten the screws to secure the
segment(s) properly.
Drawing 2
Drawing 3

Publicidad

loading