Publicidad
Idiomas disponibles
Idiomas disponibles
Operation Procedures
The Switch Button
Switch Button
0-----OFF
I-----ON
： Assemble the heater according to the Assembly Instructions.
First Step
Second Step ： Connect this heater properly to the right electric power system according to
： Turn the power on and press the switch button to the right working condition.
Third Step
ALWAYS UNPLUG HEATER AND BE SURE HEATER IS COOLED TO ROOM
TEMPERATURE BEFORE CLEANING AND MAINTENANCE.
To maintain the appearance of your heater, never use abrasive cleaning agents (such as cleansing
powers, scouring pads, steel wool pads or detergents with granules, etc). Spray water onto a cloth or
sponge and then clean. Avoid operating heater at any time when any part of the heater is not
completely dry to reduce the risk of burns, fire, electric shock, personal injury or damage to property
To obtain maximum performance from heater, it is recommended that the following be done at least
once a year: With an appropriately regulated and suitable stream of air from an air-hose, blow off any
dust and dirt from heater that has accumulated on the heating elements and reflective surfaces.
Store the heater in a dry and dust free place under suitable cover and be sure the reflective surface
and the heating elements of heater are protected from any possible damage.
OPERATIONS
the instructions.
CARE AND MAINTENANCE
Publicidad
