Publicidad
1
4. Install:
G
Filler caps
CAUTION:
Rinse off any electrolyte from the battery
case and wipe the battery dry prior to
installation.
OIL PUMP AIR BLEEDING
1. Bleed:
G
Air
Air bleeding steps:
Place rags around the air bleed screw
G
1 to catch any oil that might spill.
G
Fill the oil tank with the recommended
engine oil.
Recommended engine oil:
YAMALUBE 2-W or an
equivalent TC-W3 certified
outboard oil
G
Loosen the air bleed screw 1 two full
turns and make sure that both the oil
and air bubbles flow out.
When there are no air bubbles left,
G
tighten the air bleed screw.
Wipe up any spilt oil.
G
Air bleed screw:
5 N • m (0.5 kgf • m, 3.6 ft • lb)
CAUTION:
Do not run the engine if oil does not flow
G
out the air bleed screw. Inspect the oil
lines for proper routing and make sure
there are no restrictions in the line.
Fill the fuel tank with 50:1 premixed fuel
G
using the recommended engine oil during
the first full tank of operation.
– 16 –
E
Publicidad
