TEChNICal paramETEr aNd
sOluTIONs FOr sImplE FaIlurE
Failure
check wether the power supply
is in good connection with main
Power on, the machine
machine
iS no reSPonSe
check wether the power switch
is on
check whether the accessory is in
no outPut
good and right connection with
the out put port of main machine
using For too long time,Power
off and naturally cool Down
During working, the main
check whether electricity voltage
machine iS overheat
is correct(need Professional
People to check)
check the fuse, if broken need to
no Power
replace it.
Voltage
Power
240/110 V
100 W
paCkINg lIsT
name
unit
Main machine
set
Big RF handle
Pc
Small RF handle
Pc
Metal stick
Pc
Treatment head
set
Power wire
Strip
Fuse
Pc
Instruction
Pc
NOTICE
1. The instrument has been delivered with full
items, when received the instrument, please
check all the accessories whether something is
missing, and refer to our packing list.
2. If something is broken during transportation,
please report to the dealer and send us a copy
information.
3. Please reserve the original packing items, when
need maintain, it is necessary to send us the
instrument with original packing.
Solution
Hz.
Size
50/60 Hz
54 x 40 x 23 cm
QtY
remark
1
1
1
1
7
1
treatment
heads
1
2
1
· 231 ·
saFETy NOTICE
1. The machine is professional instrument for
beauty salon, in order to avoid any unneces-
sary hurt, need professional beautician to make
operation.
2. Do not disassemble the machine or operate
the machine that not explained in the instruc-
tion book. All the maintenance services shall
be carried out by the professional maintenance
technician approved by our company.
3. Do not install or operate the machine with wet
hands or near the water sources so as to avoid
the liquid spraying/swashing over the machine.
4. Pull out the plug and connect with the mainte-
nance service center in the following cases:
•
A. liquid spray/swash over the machine or
the machine get caught in rain or water.
•
B. the machine has peculiar smell, fume/
smog or abnormal noise.
•
C. power wires damaged or scratched.
•
D. instrument fell down or the shell damaged.
5. Do not put any item on the power wires, or ins-
tall the instrument in the place where its power
wires will be trampled.
6. Pull out the power wires at the end of use for the
sake of safety.
7. Do not insert any type of item into the instru-
ment opening; otherwise there will be a fire or
electric shock. In case of something fell into the
opening but you could not take it out, please pull
out the power wires and connect with the dealer
or our company.
8. Do not put the instrument on the unstable tro-
lley, shelf or vehicle, if fall down, the instrument
may be damaged.
9. To guarantee the life circle of this machine,
the interval of the continuous switch on and off
should be over one minute.
10. The power shall comply with the specification
specified in the label, otherwise the machine will
not run or run abnormally, even be burnt out.
11. The company has right to revise or amend this
manual.
The company reserves all the rights of interpre-
ting the information mentioned above.
1
1
i