Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.5A OSCILLATING SPINDLE SANDER
Figure 1
GROUNDIN
G PIN
ADAPTER
GROUNDIN
G MEANS
Table 1
Minimum gage for corda
Volts
Ampere
Rating
120V
240V
Not
More
More Than
Than
0
6
6
10
10
12
12
16
ADDITIONAL SAFETY WARNING
FOR YOUR TOOL
1. For Your Own Safety Read Instruction Manual
Before Operating tool
a) Wear eye protection.
b) Support workpiece with worktable.
c) Avoid kickback by sanding in accordance with
the directional arrows.
2. Avoid unintentional starting. Make sure you are
prepared to begin work before plugging in the
sander.
3. WARNING! People with pacemakers should
consult their physician(s) before using this
product. Electromagnetic fields in close
proximity to a heart pacemaker could cause
interference to or failure of the pacemaker.
In addition, people with pacemakers should
adhere to the following:
8
Grounding methods
METAL SCREW
COVER
OF
GROUND OUTLET
BOX
GROUNDING
PIN
Total length of cord in feet
25ft.
50ft.
100ft.
50ft.
100ft.
200ft.
AWG
18
16
16
18
16
14
16
16
14
14
12
Not Recommended
a) Avoid operating power tools alone.
b) Properly maintain and inspect all tools before
use to avoid electrical shock.
4. Never leave the sander unattended when it is
plugged into an electrical outlet. Turn off the
tool, and unplug it from its electrical outlet
before leaving.
5. WARNING! Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities, contain chemicals
known to cause cancer, birth defects or other
reproductive harm.
Some examples of these chemicals are:
a) Lead from lead-based paints;
b) Crystalline silica from bricks and cement or
other masonry products;
c) Arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies,
depending on how often you do this type
150ft.
of work. To reduce your exposure to these
300ft.
chemicals:
a) Work in a well ventilated area
b) Work with approved safety equipment, such as
14
those dust masks that are specifically designed
12
to filter out microscopic particles.
6. Take caution as some woods contain
12
preservatives such as copper chromium
arsenate (CCA) which can be toxic. When
sanding these materials extra care should be
taken to avoid inhalation and minimize skin
contact.
INSPECTION, MAINTENANCE, AND CLEANING
BEFORE EACH USE, inspect the general condition
of the Spindle Sander, check for loose screws,
misalignment or binding of moving parts, cracked
or broken parts, damaged electrical wiring, and any
other condition that may affect its safe operation.
If abnormal noise or vibration occurs, have the
problem corrected before further use. DO NOT USE
DAMAGED EQUIPMENT.
SAVE THESE INSTRUCTIONS
Refer to them frequently and use them to instruct
others who may use this tool. If someone borrows this
tool, make sure they have these instructions.
Avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling and other
construction activities. Wear protective clothing and
ENG
Publicidad
Tabla de contenido
