Hans Pfefferkorn 20.717 Manual De Instrucciones página 18

Open the lock
on the valve
connector
�
0
�
)
'--"
To now inflate the tire, press the "Compressor'' switch (17) on the back of the Power Station. The
compressor starts running and emits compressed air. You can read off the air pressure in real-time
using the manometer (15) on the Power Station Turn off the compressor using the "Compressor"
switch (17) once the desired air pressure has been reached. Remove the air hose from the tire in
reverse order and store it in the Power Station's storage compartment (5) - be sure not to bend or
twist the hose.
Caution: The compressor warms up considerably during use. For this reason, never operate
the compressor for langer than 10 minutes without interruption. Turn off the compressor
after 10 minutes max. and allow it to cool down before further usel
The Power Station includes three adapters for inflating other small-volume objects with the
compressor. The included adapters are:
26 27
Follow the operating step "lnflating a tire with car or Schrader valve" to insert the adapter in the
air hose's valve connection. Then follow the other listed steps.
Caution: Never use the compressor while simultaneously charging the Power Station!
Voltage inverter
The Power Station features a voltage inverter with a continuous output of 150 Watt. The voltage
inverter can be used to convert the 12 Volt voltage of the Power Station battery to 230 Volt AC
voltage with a modified sine wave.
Voltage inverters with a modified sine wave can be operated with diverse electrical devices. Please
first check with the manufacturer of the device you wish to operate whether operation with this type
of voltage inverter is possible. Malfunctions may occur when using electronic power adapters or
similar devices.
The voltage inverter supplies a continuous power output of 150 Watt. The connected device may
not exceed this value (see the rating plate on the device). Devices with electric drive such as power
drills or polishing machines require a much larger output at startup than listed on the rating plate.
Caution: Do not use a multiple plug outlet or extension cord with the voltage inverter!
The voltage inverter is not designed for continuous operation and turns off automatically in
case of overload.
20717-Marketlink-lM-V0l-lNT.indb 18
Place the valve
connector on the
valve
26. 6 Bike valve adapter (for Dunlop and Sclaverand)
27. Ball adapter
28. Universal adapter for recreational items
(inflatable flotation devices, etc.)
28
Lock the valve
connector
You may now
inflate the tire with
the compressor
0 1;:::::;==-�
15/12/2016 18:27 1