Operation; General Information; Remote Control - Off Indel B PLEIN-AIRCON 12V Instrucciones De Uso Y Mantenimiento

OPERATION

●
OPERATION MODE:
● FAN SPEED: auto, high, medium, low.
● The TIMER function for programmed switching on and off.
● The SLEEP function for night-time operation.
● The CLOCK function is always on to view the current time.
● The remote control works with 2 x 1.5 V AAA batteries (fig. 03).
MIN-MAX button: by pressing the MIN-MAX button on the air diffuser, you can manually increase
●
the power (see AIR
BATTERY PROTECTION: if the voltage value of the auxiliary battery, to which the conditioner is
connected, falls below ~10 V,
displayed by alternately flashing the green and red LEDs located near the MIN-MAX button on the
●
air diffuser. The flashing of the LEDs remains until
V, thus allowing the system to resume operation that was previously interrupted (without manual
intervention).
KEY FUNCTION DESCRIPTION
I/O (ON/OFF) It turns the air conditioner on/off.
It allows to choose in sequence among the 3 working
MODE
dehumidification
Allows you to choose sequentially between ventilation speeds:
low.
FAN
In dehumidification mode
▼ TEMP ▲ They allow to choose the desired temperature between 15 °C and 30 °C.
It allows to choose in sequence: ON←OFF (tempo nelle funzioni); ON→OFF (scheduled
TIMER shutdown); (no scheduling).
When a schedule is set, the ˄ ˅ key allows to choose the desired time from 1h to 16h.

GENERAL INFORMATION

air conditioning , dehumidifying
DIFFUSER).
the protection system stops the system operation.
REMOTE CONTROL (fig. 03)
, ventilation
(at start-up), ventilation is always at minimum speed.
14/40
, ventilation .
the battery voltage value returns above 11.5
modes:
.
Plein-Aircon
This condition is
air conditioning ,
auto, high, medium,