Technical Specifications; Using The Chronograph - HAUREX OS 10 Instrucciones Y Garantía

CHRONOGRAPH
MINUTE HAND
HOUR HAND
CHRONOGRAPH
HOUR HAND
SECOND HAND

TECHNICAL SPECIFICATIONS

■
Battery life: approx. 2 years.
■
Battery: SR927W or similar.
■
Accuracy: ± 20 seconds per month.
INSTRUCTIONS
■
Crown: setting modes.
■
Button PB1: start and stop.
■
Button PB2: reset.
SETTING THE TIME
1. Pull the crown out to position (2), the sec-
ond hand stops to the (0) position.
2. Turn the crown to set hours and minutes.
SETTING THE DATE
1. Pull the crown out to position (1).
2. Turn the crown to the right to set the date.
3. When the date has been set return the
crown to the normal position.

USING THE CHRONOGRAPH

The chronograph is able to measure and
show time in 1/10th second units up to a
maximum of 1 hour.
MINUTE HAND
PB1
(0) (1) (2)
PB2
CHRONOGRAPH
SECOND HAND
TIME CHRONOGRAPH MEASURE-
MENT
1. Press button (PB1) to start and stop the
2. By pressing button (PB2) the chronograph
CHRONOGRAPH SECOND HAND
CORRECTION (If it is not aligned at the 0
position)
Pull the crown out to position (2); press the
button PB1 to advance hands at 12:00 (0).
CROWN POSITION
FOR TIME SETTING
chronograph.
is set to zero and all hands are reset to the
(0) position.
GB
ANALOG
CHRONOGRAPH
HAUREX OS 10