HITWAY 14F004 Manual De Usuario página 7

PRECAUTIONS
Battery and charging:
Charge at 0℃～45℃, discharge at -20℃～60℃, Please keep the battery dry. It is strictly forbidden to put the battery in acidic or
alkaline liquid, avoid rain, keep away from fire, heat and high temperature environment. It is also forbidden to reverse the
positive and negative poles of the battery, insert or short-circuit the battery. When charging, please use the original special
charger, not more than 6 hours, and the charging current does not exceed 2A. When suspended for a long time, please keep the
battery in a dry place, and charge the battery for five hours every month. The user must charge according to the instructions,
otherwise, customers need to bear the necessary responsibilities. Please pay attention to the type of battery and the applicable
voltage that the charger can charge,the use of unmatched chargers is strictly prohibited. When charging, it should be placed in a
ventilated environment. It is forbidden to charge in residential buildings and confined spaces or in hot and high-temperature
environments. When charging, insert the battery first, and then add the city power; after charging, cut off the city power first,
and then pull out the battery plug. When the green light is on, the power supply should be cut off in time, do not connect the
charger to the AC power for a long time without charging. During the charging process, if the indicator light is abnormal, odor,
or the charger case is overheated, stop charging immediately, and repair or replace the charger. During the use and storage of the
charger, pay attention to avoid the entry of foreign objects, especially to avoid the flow of water or other liquids, so as not to
cause a short circuit inside the charger. The charger should not be carried with the vehicle as much as possible. If it is indeed
necessary to carry it, it should be placed in the tool box after shock absorption treatment. Do not disassemble or replace the
accessories in the charger.
Riding:
Do not use it until you read the instructions carefully and understand the performance of the product; do not lend it to anyone
who will not manipulate the product. Check whether the brake is working before riding the bicycle. When braking, please use
the rear brake first and then the front brake. Pay attention to the tightness of the brake. If you find that the brake is too loose,
you can use an allen wrench to tighten it. Pay attention to increase the braking distance when riding in rain or snow. Applicable
age: 16 to 45 years old riding.
Cyclists must wear safety helmets, comply with traffic guidelines, and are not allowed to drive on motor vehicle lanes and roads
with many pedestrians. Please check the tire pressure before riding. The recommended tire pressure is 35 ~ 45 PSI.
Downhill and non-paved roads do not exceed 15KM/h.
When using the motor, be careful not to hit it strongly and you need to keep the shaft lubricated.
It is not allowed to ride more than the maximum negative weight of the body (maximum load 120KG)
After use, the car can not be parked in the building entrance hall, evacuation stairs, safety exit. The rider must be properly
parked in accordance with the safety regulations.
One-handed riding is prohibited!
Responsibility statement:
After the ride, please store the car in a place without sunlight and rain, and cannot be placed in a residential building;
Often check the motor and brakes;
Regularly check the screws of the car and the places to be tightened, and tighten regularly . Recommended torque: (unit: kgf.cm)
60-80 horizontal screws, 175-200 vertical screws, 175-200 seat cushion screws, 320-450 wheel screws;
The front and rear wheels of the vehicle should be located in the center of the front fork or frame; Always check the wheels for
scars, cracks, or excessive wear. The inner tube and valve should be perpendicular to the wheel hub and should not be skewed.
Damaged or excessive; worn tires need to be replaced immediately. Please find a professional technician to replace your tires. If
your tires accidentally puncture and leak, please contact a professional technician for repair or replacement.
Maintenance:
The product model, specifications or related information mentioned in this manual, the company reserves the right to modify
and final interpretation;
The functions of specific models mentioned in this manual only applicable to the specific model;
This use The product model, specifications or related information mentioned in the manual are subject to any modification or
change without notice;
Without the prior written permission of the company, it not allowed to be copied, modified, reprinted, disseminated or used in
any form to use the content of the manual.
Please read this user manual carefully and follow the operation manual before using the product, otherwise the company will not
be responsible for product damage or personal or property damage caused by improper use or error
5