The Indication When Power Source Is Supplied - eco touch RC-EX1A Manual De Instrucciones

5. The indication when power source is supplied

Power on and initial setting
Power on and initial setting
Set the main and sub R/C units according to the display at the power on.
(1) When the main and sub are not yet set, ① ⇒ ② Main/sub input screen is displayed.
When tapping the [Main] or [Sub] button, initial setting starts.
If any wrong button has been tapped by mistake, the setting can be changed after the end of the initializing
operation.
(2) When the main and sub R/C units have already been set, ⑥ Ackowledge screen to continue setting is displayed.
(3) When using 2 units of RC-EX1 as the main and sub, if the first one is set for the main, the second is set for the
sub automatically.
① Start screen
② Min/sub set input
③ IU search on
④ IU info acquisition on
[Main] ③ ⇒ ④ ⇒ ⑤
[Sub] ① ⇒ ⑥ ⇒ ⑤
Caution
· When only one unit of R/C is used, tap the Main button.
In the state of initial setting, if either one of buttons ([Main]/[Sub]) is not tapped, it keeps the
screen unchanged.
When two R/Cs are used, if either one of them is set for the main, the other is set for sub
automatically.
— 13 —