Chaumet GMT WATCH Manual De Instrucciones página 4

Setting the 2 time zone
nd
To adjust hand a, use corrector buttons A and B.
To adjust hand b, use the pulled out crown. Each
press on corrector button A moves the time
forward by one hour, and on corrector button B
backwards by one hour.
Starting your watch: setting the time and date
To set the time, pull the crown out to position 2
A
(maximum), and turn it clockwise to position hand c
at 2.00 am (on the 24-hour scale). Hands a, b
and c turn.
1 2
Press corrector button A until the date changes
(hand d). The watch now shows midnight.
Press corrector button A twice more to position
the hour hand a at 2.00 am (on the 12-hour scale).
Next, press corrector button C until the desired
B
C
date is shown (hand d).
Still in position 2, turn the crown clockwise, to set
the desired reference time (hand c).
The local time (hands a and b) on the 12-hour
time scale and the reference time (hand c) on the
24-hour time scale are now identical.
After use, make sure you always push the crown
back against the case to position 1.