Replacing The Starter Rope And Rewind Spring - Stihl KM 130 R Manual De Instrucciones

Replacing the Starter Rope
and Rewind Spring
Replacing the Starter Rope
1
2
1
Push the slide control in direction of
N
arrow h – to STOP-0.
Take out the screws (1).
N
Remove the starter cover (2) from
N
the housing.
KM 130 R
1
Ease the spring clip (3) off the
N
starter post.
Remove the rope rotor with
N
washer (4) and pawl (5).
Remove the remaining rope from
N
the rotor and starter grip.
3
4
5
N
N
N
N
6
Tie a simple overhand knot in the
new rope and then thread it through
the top of the grip and the rope
bushing (6).
Thread the rope through the rotor
and secure it with a simple
overhand knot.
Coat the rope rotor bearing bore
with non-resinous oil.
Slip the rotor over the starter post –
turn it back and forth to engage the
anchor loop of the rewind spring.
English
21